User`s guide

AUDIX Administration and Data Acquisition Package 585-302-502 Issue 17
May 2002
Using the ADAP Command Line Language
11-4Logging Into the Voice Mail System
11
NOTE:
The -P option is required when logging into a DEFINITY AUDIX system as
cust and is invalid otherwise.
While executing this command, the software makes three attempts to connect
with the voice mail system. If the -R (retry) option flag is set and errors occur
during the login (such as an invalid login attempt), the connection is dropped and
automatically retried from the beginning, up to three times.
If you specify an invalid option or omit a required option, the following message
appears:
If this happens, check your options and re-enter the command.
loginID Identifies your voice mail system login ID.
password Identifies your voice mail system login password.
phone number Identifies the voice mail system phone number. This number
is not required for direct cable configurations. If you have a
Hayes-compatible or AT&T 4000 modem, enter t in front of
the phone number for touch-tone dialing.