User guide

Task 18: Alarm Origination Administration/test and Status Tape
Issue 1 September 1995
4-5
7. If all the fields are properly filled in, press the (F1) function key to exit the
screen.
This completes the alarm origination and test.
8. Verify the status of the add-tape function performed in the previous task by typing
status tape followed by .
The system displays the Status Tape screen..
9. The Status field should display
In service, idle . If not, see DEFINITY AUDIX
System — Maintenance
, 585-300-110.
CANCEL
RETURN