User guide

Task 17: Check the Status of the Switch Names Audit
Issue 1 September 1995
3-35
The system responds with the Administration Log screen.
Leave the Start Date, Time, and Type fields on page 1 blank to display all
log entries. Press (F3) to display the administration-log entries on
page 2 of the screen.
4. Check the log for entries that indicate the Switch Names audit found one
or more non-unique subscriber names.
If the Switch Names audit finds a non-unique subscriber name the
DEFINITY AUDIX system will answer in
stand-alone mode for that
subscriber (requiring the caller to reenter the subscriber’s extension). In
addition, each time the Switch Names audit runs (at least nightly), it will
write an entry in the Administration log for each non-unique subscriber
name, which can quickly fill up the log file.
If the Switch Names audit finds 50 or more non-unique subscriber names,
the entire switch names database is discarded and the DEFINITY AUDIX
system will answer in stand-alone mode for
all subscribers. This condition
is indicated by an entry in the Administration log.
For a description of the restrictions on subscriber names, see the section
Restrictions On Switch Translations in Chapter 3 of Switch Administration
for the DEFINITY AUDIX System
, 585-300-509.
ENTER