User guide

Task 15: Activate Parameters and Basic Features
Issue 1 September 1995
3-29
Task 15: Activate Parameters and Basic
Features
This task is required if the customer has indicated specific features to be
activated. Check Worksheet C-6,
Activate Parameters and Basic Features to see
if any features are to be activated. If no features are to be activated, skip to Task
16: Add Tape. Otherwise, perform the following steps.
1. With the cursor on the DEFINITY AUDIX command line, type change
system-parameters features and press .
The system displays the System-Parameters Features screen
.
2. Move the cursor to any of the fields to be changed on the first page and,
using the information on Worksheet C-7,
Activate Parameters and Basic
Features
, type the values specified.
RETURN