User guide

Task 14: Perform Initial DEFINITY AUDIX Administration
Issue 1 September 1995
3-27
The system displays the List Configuration screen.
2. Make sure the screen displays the following components (indicating that
the system correctly recognizes all the components).
■ ALARM_BD
■ ABP_FW
■ MFB_BD
■ FAC_FW
■ 386_FW
■ DISK
■ TAPE
3. If all the components are listed and shown in the proper location, skip to
Step 4. Otherwise, see
DEFINITY AUDIX System — Maintenance ,
585-300-110, for troubleshooting procedures.
4. With the cursor on the DEFINITY AUDIX command line, type
status voice-group and press .
RETURN