User guide

Task 14: Perform Initial DEFINITY AUDIX Administration
Issue 1 September 1995
3-21
Task 14G: Set System Parameters Limits
This task is required only if the customer wants to use subscriber limits that are
different from the defaults. Check Worksheet C-4,
Set System Parameters Limits ,
to see if you need to change the system parameters limits. If not, skip to Task
14H: Run the Switch Translations Audit a Second Time. If changes are indicated
on the worksheet, perform the following steps.
1. With the cursor on the DEFINITY AUDIX command line, type change
system-parameters limits and press .
The system displays the System-Parameters Limits screen.
2. Move the cursor to each of the fields that is to be changed (according to
Worksheet C-4
Assign Switch LInk Translations ) and type the new system
parameters limits.
3. Once you have changed all the fields, press the (F3) function key
to save the changes.
4. Proceed to Task 14H: Run the Switch Translations Audit a Second Time.
RETURN
EN TER