User guide

Initial System Administration
3-20 Issue 1 September 1995
Task 14F: Synchronize DEFINITY AUDIX System
and Switch Clocks
This task is required for all installation scenarios.
NOTE:
The switch clock may not be set at this time. If it is not, set the switch clock
before performing this task. (See the appropriate switch document for the
procedure to set the switch clock.)
1. With the cursor on the DEFINITY AUDIX command line, type set time and
press .
The system displays the Date And Time screen.
2. With the cursor at the Synchronize to Switch field, type y.
3. Press the (F3) function key to save the changes.
4. Proceed to Task 14G: Set System Parameters Limits.
RETURN
ENTER