User guide

Task 14: Perform Initial DEFINITY AUDIX Administration
Issue 1 September 1995
3-19
Perform the following steps:
1. Enter in the Host Switch field the switch number assigned to the switch
into which the AUDIX system is installed.
2. Enter in the AUDIX field the machine number of the AUDIX system being
installed.
3. Enter in the Call Answer Timeout field the number of seconds the system
shall wait for touch-tone digits when it answers a call without receiving a
“connect” message. (At the end of this period, the system treats the call
as specified in the following steps.)
4. Enter in the Call Answer Timeout field one of three possible ways a call is
to be handled when the timeout period (just established) expires:
■ Enter none if the call is simply to be disconnected.
■ Enter mailbox if the call is to be transferred to a mailbox.
■ Enter transfer if the call is to be transferred to an extension.
5. Finally, enter in the
extension field the number of the mailbox or extension
to which a call is to be transferred after it has timed out.
You may leave this field blank if you entered
none in the previous step.
6. Press the (F3) function key to save the changes and proceed to the
next task.
ENTER