User guide

Task 14: Perform Initial DEFINITY AUDIX Administration
Issue 1 September 1995
3-17
If the system will be using CL integration, perform the following steps.
1. With the cursor on the DEFINITY AUDIX command line, type change
switch-link and press .
The system displays the Switch-Link
DCIU-SCI0 screen.
2. Enter values for the Host Switch and AUDIX fields from Worksheet C-3
Assign the DEFINITY AUDIX Machine ID . The number entered in the Host
Switch field must match the
Local PBX ID administered on the switch.
NOTE:
If the Logical Channel, Switch Port, or Data Link fields display values
for any of the 20 switch numbers (rows) on this screen, these fields
must be cleared (using the [F4] function key) before
proceeding to the next step.
■ Move the cursor to the Switch Number row corresponding to the host
switch number that you entered in step 2, and enter values for the Logical
Channel field, the Switch Port field, and the Data Link field from Worksheet
B-7a:
Assign the Data Link (CL Integration for non-G3r Switches) or B-7b:
Assign the Data Link (CL Integration for G3r Switches) .
RETURN
CLEARFIELD