User guide

Initial System Administration
3-8 Issue 1 September 1995
Task 13A: Set System Parameters for Intuity
Message Manager
1. With the cursor on the DEFINITY AUDIX command line, type change
system-parameters IMAPI-options and press .
The system displays the System-Parameters Imapi-Options screen
.
2. Move the cursor to the Maximum Number of ENABLED IMAPI
Sessions field. This should be 32.
3. Move the cursor to the Enable Check New Messages field. Set to y.
This allows clients to check for new messages without the overhead of
logging in. If left at n, automatic new message notification from Intuity
Message Manager is disabled.
4. Move the cursor to the Enable Deliver CA Message field. Leave at n.
Entering y enables the public class-of-service function allowing messages
to be delivered over the IMAPI interface. This feature is not used in Intuity
Message Manager Release 1.0.
5. Move the cursor to the Enable Voice File Transfer field. Enter y to
enable the use of the personal folder in Intuity Message Manager and also
to enable voice file transfer for all subscribers who have IMAPI Voice
File Transfer enabled.
6. Move the cursor to the IMAPI Session Timeout field. This is the
amount of time that a session can be inactive before the user is logged out
of the mailbox. Intervals can be set in five-minute increments from 5 to 60
minutes. Leave at 5. After being logged out, the user still has an active
TCP/IP connection to the AUDIX server.
RETURN