User guide

Task 10: Finalize and Test the Hardware
Issue 1 September 1995
2-31
The system responds with the Password prompt.
b. Enter crftpw.
The system responds with the Enter terminal type prompt.
c. Enter one of the following:
■ 513 for a 513 BCT or 715 BCT; enter 513 also for a 610/615
BCT or a PC with a 513 emulation package. (Since 513 is the
default, you can just press to select it).
■ 4410 for a 4410 or 5410 terminal; enter 4410 also for a
610/615 BCT or a PC with a 4410 emulation package.
■ 4425 for a 4425 or 5425 terminal
■ 5420 for a 5420 or 4415 terminal
■ g3-ma for a G3-MA terminal
If the terminals and modems (if applicable) are connected properly
and the options are set correctly, the system responds with the
AUDIX command line.
3. Verify that the DEFINITY AUDIX system hardware and software
components are installed properly. (If you have installed more than one
terminal, you can use either one for the remainder of this task.) At the
DEFINITY AUDIX system command line, enter list configuration. The
system responds with the List Configuration screen. The following screen
shows sample locations, board codes and vintages.
RETURN