User guide

Announcement Set Considerations and Installation
A-4 Issue 1 September 1995
5. Type add tape and press . The add operation takes approximately
15 seconds and is done in the background. When the operation is
complete, the Status Tape screen will show In service, idle.
6. Restore the new language set onto the disk by typing restore backups
and pressing . To confirm this operation, press again.
7. Type remove tape and press . Remove the new language tape
and insert the original backup tape.
8. If more than one language set is being added to the system, repeat steps
4 through 7 with each new language tape.
9. Bring the system back to the AUDIX state by typing reset system restart
and pressing .
RETURN
RETURN RETURN
RETURN
RETURN