User guide

Installing Additional Language Sets
Issue 1 September 1995
A-3
The recorded words in the fourth column are announcement set identifiers used
when system administrators edit announcement sets. For all announcement sets,
these names are played in
Announcement #855 .
NOTE:
The following table offers a representative list of announcements. The list of
available announcements constantly changes. Contact your AT&T
representative for an up-to-date list.
Installing Additional Language Sets
Perform the following procedure to add new language sets to a DEFINITY AUDIX
system. Each language set is provided on its own tape.
1. Inform subscribers through a broadcast message that the DEFINITY
AUDIX system will be taken off the line for possibly a half hour.
2. Log in to the DEFINITY AUDIX System on the administration terminal as
craft.
3. Bring the system to the Operations, Administration, and Maintenance
(OA&M) state by typing reset system oa&m and pressing . Use
the
camp-on option to allow any callers to complete their messages.
4. Remove the backup tape and insert the new language tape.
Announcement
Set Names
Touch-
Tone ID
Multilingual
Self-ID Announcement
Administration
Self-ID Announcement
us-eng 87364 “English” “Standard US English”
(standard) (“Standard American”)
us-eng-t 873648 “English” “Terse US English”
(terse) (“Terse American”)
us-123 87123 “English” “123 Standard US English”
(123stand) (“123 Standard American”)
british 2748474 “English” “British-English”
(british) (“British-English”)
lat-span 5287726 “Español” “Español”
(lat-span) (“Latin-Spanish”)
french-c 3736242 “Francais” “Canadien Francais”
(french-c) (“Canadien Francais”)
us-tdd 87833 “TDD ENGLISH” Standard U.S. TDD
dutch 38824 “Nederlands” “Nederlands”
german 437626 Deutsch Deutsch
portug 767884 Português Português
RETURN