User guide

After the Upgrade
Issue 1 September 1995
7-27
21. Log in as craft.
22. With the cursor on the command line, enter test lan. The following screen
will appear.
23. Press the (F3) function key to begin the test. The test takes up to
2½ minutes to run.
If any of the individual tests fail or abort, refer to
DEFINITY AUDIX
System — Maintenance
book, 585-300-110. If there are problems with the
network itself, the LAN system manager will have to resolve these
problems before proceeding with this test.
24. To test if a connection can be made to an Intuity Message Manager user
or other LAN node, enter test lan dest
and the IP numerical address (in
the form
nnn.nnn.nnn.nnn ) on the screen. Press the (F3) function
key.
If the connection is made, a UNIX success message is returned. The test
takes approximately 15 seconds. If the test fails, refer to
DEFINITY AUDIX
System — Maintenance
book, 585-300-110. If any connection or login
fails, discuss the LAN connection with the LAN administrator. This person
is responsible for all aspects of the LAN and will ensure that it is problem-
free. Follow the troubleshooting guidelines in the
Intuity Message
Manager User’s Guide
, 585-310-725.
ENTER
ENTER