User guide

After the Upgrade

Issue 1 September 1995

7-23

Figure 7-3. 104A Mounting Block

2. Mount the 104A connecting block on the wall field.

3. Connect the RJ45 10BaseT LAN connector into one of the connections at

the bottom of the 104A connecting block.

4. Connect one end of the D8W modular wall cord supplied with the upgrade

kit into the other connection at the bottom of the 104A connecting block.

5. Connect the other end of the D8W modular wall cord into the Alarm Board

RJ45 connector.

NOTE:

Joint Acceptance Testing is required by both the customer and the

AT&T installer. Acceptance Testing is performed at the end of the

installation. This demonstrates that installation was successful.

AUDIX Server Testing is also performed at this time.

104A

Alarm Board LAN

Connector

10BaseT

LAN

Connection

DEFINITY AUDIX