User guide

Task 21: Add Two Test Subscribers
Issue 1 September 1995
4-9
The system responds with the Subscriber screen.
NOTE:
The two test subscriber extensions used in this task must be
administered on the switch. The second test extension must have
the coverage path for the AUDIX set. You can administer
subscribers on the switch using the Add Station screen.
3. With the cursor at the Name field, type the name of the first test subscriber
(for example, test-1 or subscriber-1).
4. Move the cursor to the Extension field and type the extension of the first
test subscriber that you are using for the test. (These are the only fields
that you need to fill in. The system will use defaults for the remaining
fields.)
5. Press the (F3) function key to add the test subscriber.
6. Repeat Steps 2 through 5 for the second test subscriber.
ENTER