User manual

9
To Install the camera:
1. Select the position for your camera
If the DVR has already been attached to a TV, you can attach the
camera to power and check both the cameras view and the level of
interference at the same time (see page 11 for more information on
wireless interference).
2. Mount the camera
Use an appropriate screw type for the surface you’re mounting the
camera to. Make sure the lens is upright relative to your subject -you
can tell easily as the antenna should be relatively upright.
3. Connect the camera to power via the supplied power adaptor.
Remember that the power adaptor and power cables are not weather
resistant, and need to be sheltered from moisture, rain and sunlight.
4. Set the camera’s channel
The camera can transmit its images on one of four channels. To set
the channel: