User manual

14. Troubleshooting

Problem: I can’t record images from two cameras simultaneously!

Solution: This is not a malfunction -the can only record

one camera at a time. While it is possible to monitor two cameras at

once (one wired, one wireless) it is not possible to record both at once.

If using PIP (Picture in Picture) MODE, the will

automatically switch between cameras to record whichever one

detects motion.

Problem: The will only pick up one of my wireless

cameras.

Solution: Whilst the can be tuned to four wireless

channels, it can only monitor one of them at a time. There is no

automatic switching function: if you want to change the wireless

channel that the is monitoring, you need to do this

manually by pressing the SW button. For this reason, we do not

recommend using multiple wireless cameras with the .

Solution: Your camera’s signal is probably suffering from signal

blockage or interference. Try realigning the antennas (sometimes an

inch can make all the difference) or moving the itself.

You may need to try moving the camera, as well. If this does not help,

you may need to shut down other wireless equipment operating

nearby to the .

Problem: There seems to be a red haze in picture.

Solution: This is most likely caused by a strong light source (such as