User manual

21
12. Playing Back Images and Videos
There are two ways to view images and videos captured by the
wireless DVR. One way is to view them through the wireless DVR (and
the TV that the wireless DVR is connected to) and the other is to
simply take the SD card out of the wireless DVR, and insert it into an
SD card reader attached to your computer.
To Playback images/videos using the wireless DVR:
’
The controls in PLAYBACK MODE are:
REC: Play / Pause the current recording.
ZOOM: Stops the current recording during playback. When stopped,
ZOOM will open the thumbnail view, where you can navigate through
recordings using the arrow buttons. Press to select a recording
for playback.
Note: When stopped but not in thumbnail view, you can navigate using
the arrow buttons. You’ll move between recordings as though you
were in thumbnail view (ie. LEFT / RIGHT move back and forth one
item, and UP / DOWN move between rows). This can be a little tricky
to get the hang of initially, so we strongly recommend using the
thumbnail view accessible using the ZOOM button.