User manual

13
8. Viewing Live Images
By default, the wireless DVR will boot up straight into LIVE VIEWING
MODE. The DISP button will cycle between displaying a WIRED and a
WIRELESS camera connected to the wireless DVR.
The wireless DVR is capable of displaying images from two cameras
at a time. To achieve this, one of the cameras must be wired, the other
wireless. As the picture from one camera is displayed in miniature
within the other camera’s picture, this is referred to as Picture In
Picture mode (PIP MODE) .
1) Press DISP once to switch between the WIRED and
WIRELESS camera.
2) Press DISP again to activate PIP MODE.
3) Press DISP a third time if you wish to swap the positions of the
main and miniature images.
4) Note that whilst the wireless DVR can display two images at
once, it can only record one at a time. When the wireless DVR is
recording, the channel being shown full-screen is the one being
recorded.