User Manual

Speed dial

Speed dial operation

Storing a number in a speed dial location

Use the following steps to store a telephone number

in the desired speed dial memory location.

When the telephone is idle, press MENU/ENTER.

Press or to scroll to SPEED DIAL.

Press MENU/ENTER.

Press or to scroll to PROGRAM.

Press MENU/ENTER.

Use the dialing keys to enter the telephone number

(up to 24 digits). PRESS SPDIAL KEY TO SAVE

moves on the screen.

Press CID/ or /DIR to move the cursor to the



Press REMOVE to backspace and delete a digit.

Press PAUSE to insert a two-second dialing pause.

P appears on the screen.

Press the desired speed dial key.

-OR-

Press LOWER, then press the desired speed dial key.



screen displays STORED TO SPEED DIAL #01 if you

store the number to speed dial location 1.

NOTE: If the speed dial location you selected is occupied, the new telephone number

replaces the old one. Take caution not to replace entries you do not wish to delete.

Reviewing a speed dial number

If Auto speaker is turned on (see Turn auto speaker on or o on page 29):

When the telephone is idle, press MENU/ENTER.

Press or to scroll to SPEED DIAL.

Press MENU/ENTER.

Press or to scroll to REVIEW. Press MENU/ENTER.

Press or to scroll through the speed dial numbers.

If Auto speaker(see Turn auto speaker

on or o on page 29), when the telephone is idle:

Press the desired speed dial key.

-OR-

Press LOWER, then press the desired speed dial key to review the number.

•