USER'S MANUAL Cordless Telephone 9210

3
TELEPHONE OPERATION
Handset Volume
Adjust volume of what you hear
through the handset.
Make or Answer a Call
Lift handset from base
— OR —
Press P.
Flash/Call Waiting
Access special telephone
company subscriber services.
Change Channel
Switch to a clearer channel.
Redial
Press P,then press R to call
the last number dialed (up to 24 digits).
End a Call
Place handset in base
— OR —
Press O.
Exit programming.
Cancel a page.
Temporary Tone Dialing
Press to change from dial pulse
to touch tone dialing during a
call. This is useful if you have
dial pulse (rotary) service and
need to send touch tone signals
for access to telephone banking
or long-distance services.
1 Dial the number.
2 Press *. Buttons pressed
after this send touch tone
signals.
3 After you hang up,the
phone automatically returns
to dial pulse (rotary) service.
Headset Jack
You can use this telephone
hands-free when you install a
2.5 mm headset (SKU 24099),
purchased separately.
Plug the headset into the jack
under the small rubber flap. Do
not force the connection,but
make sure the plug fits securely.
Handset Ringer Style/
Battery Save
Select from four different handset
ringer styles,or turn the ringer
off and extend battery life.
1 Make sure the handset is off.
2 Press G,#.
3 Press 1,2,3 or 4 to select
your ringer style (you will
hear a sample),or press 5
to turn the ringer off.
4 Press M.
When the ringer is off,select a
ringer style to turn it on again.