- American Telephone & Telegraph User Manual Cordless Digital Answering System Speakerphone 7630

27
11 The system announces the Priority Calling Code, followed by "To
select the first digit, press 6 or 4, then press 9."
12 Follow Step 10 to change the Priority Calling Code.
13 The system announces the current base ringer setting, followed by "To
turn on or off, press 6 or 4."
14 Press 6 or 4 to change the setting. Press 9 to save the setting.
15 Press 5 to exit the set-up menu.
Reviewing Settings
1 Connect with the answering system.
2 Press 9. The system will announce the current settings.
Exit Remote Access
If you are using a touch tone phone, hang up the telephone. If you are using the
cordless handset, press a.
Audible Signals
Sound Meaning
Long ringing Incoming call
Single beep Valid button press
Three-part tone Page
Repeating 3-part tone Handset locator
Two short beeps Handset is out of range
Four short beeps Low battery
Four long beeps Base busy
Long buzzing tone Error - unsuccessful action
Series of ascending tones Action has been successful
ANSWERING SYSTEM OPERATION
At Cordless Handset or Touch Tone Phone
7630_book.1AT&T 8/12/98, 6:29 PM27