User`s guide

Select Ring (and Ringer Volume)
✔
To select a personalized
1
ring
2
3
4
While on-hook, press [
Select ]
●
Green light goes on steadily
Press [ Conference Ring ]
●
Green light next to [ Select ] winks; current
ringing pattern plays and repeats every 4 seconds
●
Display shows [ Personal Ring #x ] (x will be a
number from 1 to 8)
Continue to press [
Conference Ring ] to cycle through all 8
ringing patterns
When you hear the desired ringing pattern, press
[
Select ] again
●
Your new ring is set; green light next to [ Select ]
goes off
●
Display clears
Note: If you receive a call, go off-hook, or lose power
during selection, the process is interrupted and you
must start again.
To adjust ringer volume
1
To raise the volume, press the right half of the
if desired Volume control button labeled [ ▲ ];
to lower the volume, press the left half of the
Volume control button labeled [ ▼
]
●
Display shows [ Ringer L > > > > H ]
(There are 8 possible volume settings. On the
display, 1 arrow is the lowest setting, and 8 arrows
is the highest setting)
22