User`s guide

Mute
✔
Note: Use the Mute button in one of the following ways.
●
If your voice terminal has the Speakerphone (speak and listen) feature, use the
Mute button to turn off the microphone associated with the built-in speakerphone
or the handset.
●
If your voice terminal has the Speaker (listen-only) function, the Mute button
affects only the handset.
This feature has no effect on an external speakerphone attached to your voice
terminal nor does it have any effect on the handset.
To prevent the other
party from hearing you
1
Press [
Mute ]
●
Red light goes on and other party cannot hear you
2
When you are ready to resume conversation with the
other party, press [
Mute ] again
●
Red light goes off and other party can hear
you again
Note: If you want to speak to the other party again, you
must pick up the handset (which turns off the speaker).
The Mute feature turns off automatically when you hang
up, or switch from the speakerphone to the handset or
from the handset to the speakerphone.
Priority Calling
To place a priority call
1
Press [
Priority ]
(3-burst ring)
or Dial Priority Calling code
2
Dial extension
[dial tone]
Note: If your call is not answered and you wish to
redirect it to coverage, press [
Go to Cover ] while call
is ringing.
To send the priority call
1
Press [
Priority ]
waiting tone (3-burst)
2
Wait for called party to answer
when you hear a call
waiting ringback tone
Note: If you still receive a call waiting ringback tone,
wait a few minutes and try again.
20