User’s Manual WPS1 Waterproof Bluetooth Wireless Speaker Page 1
Welcome | Thank you for purchasing the WPS1 Introduction Features Page 2 High powered Bluetooth® waterproof speaker Wireless streaming through Bluetooth enabled devices Built-in microphone Auxiliary input to play music from any device Automatically connects to any paired devices Hands-free speakerphone
What’s included Unpack the speaker system and make sure all accessories are put aside so they will not be lost.
Content Introduction Features What’s Included Safety Information Warning! Important Safety Instructions Getting Started Location of Main Unit Controls Charging the WPS1 LED Status Indicator Powering ON/OFF Operational Instructions 2 3 5 6 8 9 9 9 Bluetooth Operation Setting up your WPS1 for pairing 10 10 Using the auxiliary input connection (3.
Safety Information Warning! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. and arrowhead symbol within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer service personnel.
Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit. 1. 2. 3. 4. 5. 6. 7. Page 6 Cleaning - Unplug the unit from the wall outlet before cleaning.
8. Lightning - Unplug the unit from the wall outlet and disconnect the antenna 9. unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading - Do not overload wall outlets, extension cords, or integral 10. Heat - The unit should be situated away from heat sources such as radiators, heat. 11. Damage Requiring Service personnel when: A. the power supply cable or plug has been damaged. B.
Getting Started Location of Main Unit Controls Top View 1 2 3 4 5 6 7 Back View 1. Decrease Volume - | Skip to previous track 2. LED light - charging 3. Increase Volume + | Skip to next track 4. Play/Pause Music Page 8 AUX DC 5V 8 9 5. Mode 6. LED light - Bluetooth indicator 7. Answer/End Call 8. 3.5mm Aux input 9.
Getting Started Charging the WPS1 1. Connect a Micro USB charging cable to the charging port on the WPS1. 2. Connect the USB end of the Micro USB cable to your computer’s USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the top panel of the speaker will turn red. 4. LED Status Indicator Bluetooth LED Indicator - Blinking Blue LED: Bluetooth on with no connection. (Ready to pair) - Solid Blue LED: Bluetooth paired and connected Powering ON/OFF 1. 2.
Operational Instructions Bluetooth Operation The WPS1 connects with most Bluetooth devices inlcuding iPad® devices, iPhone® devices, and iPod® touch devices, and most smartphones, laptops, and tablets. Setting Up Your WPS1 for Pairing 1. Turn on the WPS1 wireless speaker 2. ready to be paired with your Bluetooth device. Pairing a Bluetooth Device for the First Time 1. 2. 3. 4. Navigate to the Bluetooth manager on your Bluetooth device Search Bluetooth devices and select ‘WPS1’ to start connecting.
Operational Instructions Using the Auxiliary Input Connection (3.5mm) You can connect the audio output of an external device, such as a MP3 player or smartphone, to the WPS1 for listening to the audio of that device through the speaker system. 1. Use a standard stereo headphone (3.5 mm) cable to connect the “headphone-out” or “audio line-out” of the device to the aux-in jack of this speaker system. 2. Turn on the speaker system and the external device (eg. MP3-player or smartphone). 3.
Troubleshooting Symptom Solution Music is not streaming over Bluetooth - No power - Check if both devices are paired and connected over Bluetooth. Make sure there isn’t a 3.5mm cable connected to the aux input on the back of the speaker. Restart the WPS1 to auto-connect with your Bluetooth device. Recharge your speaker using included cable. If the problem cable. Battery is not charging - Verify WPS1 is plugged in properly and into a proper power source.
Compliance with FCC Regulations Caution! party responsible for compliance could void the user’s authority to operate the measures: - and operated to provide a separation distance of at least 20 cm from all persons THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada.
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. rights which vary from state to state. Obtaining Service: the date of purchase, model number and a brief description of the Li-Ion 1-800-8-BATTERY.
www.att.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
