User Manual

21
Directory
Create directory entries
Store a directory entry
Follow the steps, as mentioned below, to store a new entry in the directory.
When the telephone is idle, press DIRECTORY to
enter the directory menu.
Press CALL LOG or DIRECTORY until STORE is
blinking.
Press MENU/SELECT.
When the screen displays ENTER NUMBER, use the
dialing keys to enter a telephone number (up to 24
digits).
Press DELETE X to erase a digit.
Press CALL LOG or DIRECTORY to move the
cursor to the le or right.
Press REDIAL/PAUSE to insert a three-second dialing
pause (a P appears).
-OR-
Press and hold REDIAL/PAUSE to copy the last number
dialed.
Press MENU/SELECT.
When the screen displays ENTER NAME, use the
dialing keys to enter a name (up to 15 characters).
Additional key presses produce other characters on
that key (see the Character chart on page 20).
Press DELETE X to erase a character.
Press CALL LOG or DIRECTORY to move the
cursor to the le or right.
Press MENU/SELECT to save. The screen displays STORED, and then returns
to directory menu.
NOTES:
If you enter more than 24 digits in a telephone number in step 4, the screen shows
ONLY 24 ALLOWED.
If you enter more than 15 characters in a name in step 6, the screen shows
ONLY 15 ALLOWED.
If you try to store more than 25 entries in the directory, the screen displays MEMORY FULL. You
must delete an existing directory entry before you can store a new one.
1.
2.
3.
4.
•
•
•
5.
6.
•
•
7.
•
•
•
ENTER NUMBER
8003604121_
ENTER NAME
ROBERT BROWN
STORED
Blinking
q
p
REVIEW STORE