Instruction manual

DV MODE OPERATION (Optional UT-123 is required)

Repeater operation in the same zone

qSet the desired repeater’s frequency, offset and shift direc-

tion in the main band.

(pgs. 30, 31)

• Select DV mode in advance. (p. 21)

wSet your own call sign. (p. 38)

• See p. 36 for your own call sign programming.

eSet the desired station call sign. (p. 39)

• See p. 38 for station call sign programming.

rSet the repeater’s call sign as follows;

zPush [F•]twice to display the function guide 2.

xPush [CS](V/MHz)

(Left band’s) to display the “CALL

SIGN” screen.

cRotate [DIAL] to select “RPT1,” then push

[MAIN•BAND].

•RPT1 CALL SIGN screen is displayed.

vRotate [DIAL] to select the nearest repeater’s call sign

then push [BACK](V/MHz)

(Right band’s).

bRotate [DIAL] to select “RPT2” then push

[MAIN•BAND].

•RPT2 CALL SIGN screen is displayed.

nRotate [DIAL] to select the desired repeater’s

(in the

same zone)

call sign.

• Select “NOT USE✱” when not operating RPT2.

mPush [BACK](V/MHz•SCAN) (Right band’s) to exit “CALL

SIGN” screen.

tPush [PTT] to transmit; release to receive.