Instruction manual

122
15
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
yPush [BACK](V/MHz•SCAN) (Right band’s) twice to return to
frequency indication.
•“GPS” indicator stays ON when GPS signal is received, or blinks
when GPS signal cannot be received.
DD
Sentence formatters selection
q Enter MENU screen via function guide.
➥ Push [F•] to display function guide.
➥ Push [MENU](V/MHz•SCAN)
(Right band’s) to enter
MENU screen.
w Rotate [DIAL] to select “DV GPS,” then push
[MAIN•BAND] to enter DV GPS set mode.
e Rotate [DIAL] to select “GPS SENTENCE,” then push
[MAIN•BAND] to enter sentence formatter selection mode.
r Rotate [DIAL] to select the desired sentence formatter.
• RMC, GGA, GLL, GSA and VTG are selectable.
t Push [MAIN•BAND] to enter the desired sentence
formatter selection.
y Rotate [DIAL] to select the setting ON and OFF, then push
[MAIN•BAND].
u Rotate [DIAL] to select next sentence and repeat steps r
to y, or push [BACK](V/MHz•SCAN)
(Right band’s) three
times to return to frequency indication.
• Only three sentence formatters can be activated at the same
time.
Appears
“G” appears when GPS TX is set to GPS.
“A” appears when GPS TX is set to GPS-A.
No indication appears when GPS TX is set to DISABLE.
(GPS TX is described on pages 108 and 123.)