Instruction manual

100
13
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
14
13
14
15
16
17
18
19
DD
Squelch delay
Selects squelch delay from short and long to prevent re-
peated opening and closing of the squelch during reception
of the same signal.
• SHORT : Short squelch delay.
(default)
• LONG : Long squelch delay
DD
Mic sens level
Selects the microphone sensitivity from HIGH (default) and
LOW to suit your preference.
DD
Auto ATT
The attenuator prevents distortion of a desired signal by very
strong RF signals near the desired frequency or when very
strong electric fields, such as from a broadcasting station, are
present at your location.
Select the attenuator function ON
(default) and OFF.
DD
ALC
Sets the ALC (Automatic Level Control) function ON and OFF
(default).
The ALC function reduces the microphone again automati-
cally when the transmission audio is distorted.
DD
Diversity
Turns the diversity function ON and OFF (default).
DD
GPS
Turns the GPS function ON (default) and OFF.
DD
HM-154 UP/DN
Sets the assigning function to the [UP]/[DN] keys on the op-
tional HM-154.
Assignable functions:
• MIC-UP*
(default)
• MIC-DN
†
(default)
• F/LOCK (as [F• ])
• DUP/MONI (as [DUP•MONI])
•TONE/DTMF (as [TONE•DTMF])
• LOW/PRIO (as [LOW•PRIO])
•LM.CALL/MW (as [M/CALL•MW] for Left band)
•LV/MHz/SCAN (as [V/MHz•SCAN] for Left band)
•LMAIN/BAND (as [MAIN•BAND] for Left band)
•RM.CALL/MW (as [M/CALL•MW] for Right band)
•RV.MHz/SCAN (as [V/MHz•SCAN] for Right band)
•RMAIN/BAND (as [MAIN•BAND] for Right band)
*Available for “HM-154 UP” only;
†
Available for “HM-154 DN” only