- American Telephone & Telegraph User Manual 2.4 GHz Dual Handset Cordless Telephone Answering System with Caller ID/Call Waiting 2255

Connect with the Answering System
You can access many features of this system remotely from a touch tone
phone.
1 Dial your telephone number.
2 When the system answers,press #,then enter your
RemoteAccess Code (preset to 19). The system beeps twice.
3 Within two seconds,enter a remote command (see “Remote Access
Commands”).
4 Press *0to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation. Press
*5to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function Command:
Play messages in Press #,then the appropriate mailbox
a mailbox number (1,2,or 3). The system plays
new messages. If there are no new
messages,the system plays old messages.
Repeat a message Press # 4 while message is playing;
each press backs up another message.
Skip a message Press # 6 while message is playing;
each press advances another message.
Stop Press # 5.
Save messages Hang up.
Delete message Press # 9 while message is playing.
Review announcement Press # 7;system plays announcement,
then beeps.
Record announcement Press * 7;after beep,record
announcement,press # 5 to stop.
System plays back announcement.
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
23