User manual

MEMO
ANNC
L
L
E
R
I
D
/
M
E
S
S
A
G
E
S
MEMO
ANNC
C
A
L
L
E
R
I
D
/
M
E
S
S
A
G
E
S
13
Memory Dialing
Entering numbers
One touch dialing (M1-M3)
To program One Touch buttons:
1 Press PROG/MEM.
2 Enter a telephone number (up to 24 digits), or
import one by pressing REDIAL or REPEAT/MEMO.
3 Press PROG/MEM.
4 Press a One Touch button (M1, M2, M3).
5 Repeat steps 2-4 to program another button, or
press REMOVE to save and exit.
Speed dialing (1-9)
To dial numbers in Speed Dialing memory locations:
1 Press PROG/MEM.
2 Enter a telephone number (up to 24 digits), or
import one by pressing REDIAL or REPEAT/MEMO.
3 Press PROG/MEM.
4 Press a digit to select the location you want (1-9).
5 Repeat steps 2-4 to program another memory
location, or press REMOVE to save and exit.
Options while entering numbers
 Press SKIP to erase numbers if you make a mistake.
 Press REPEAT twice to enter a 3-second dialing pause.
 Press REMOVE to exit without saving the number.
To change numbers
To change a number, follow the steps above to enter
another number in its place.
Press PROG/MEM, then enter number
555 1234
ENTER NUMBER
0
MSG#
Press PROG/MEM, then press button
(M1-M3) or enter location (1-9)
ENTER LOCATION?
0
MSG#
Repeat to enter another number, or
press REMOVE to exit.
STORED
0
MSG#
MEMO
ANNC
C
A
L
L
E
R
I
D
/
M
E
S
S
A
G
E
S
12
Memory dialing
Memory capacity
The telephone can store up to 12 numbers in memory
locations for quick dialing. Each memory location can
store a number up to 24 digits long.
One touch dialing (M1-M3)
To dial numbers stored in One Touch buttons, lift the
handset (or press SPEAKER), then press a One Touch
button (M1, M2, M3).
Speed dialing (1-9)
To dial numbers in Speed Dialing memory locations:
1 Lift the handset (or press SPEAKER).
2 Press PROG/MEM.
3 Press a digit to dial the location you want (1-9).
Timeouts and error tones
If you pause for too long while programming a memory
location, the procedure will time out and you will have
to begin again.
If you store a number in a memory location that is
already in use, the old number will be overwritten with
the new number.
Directory card
The directory card provided with your telephone can
be used to record names or numbers stored in memory
locations.The back peels off to expose an adhesive
surface so you can attach it to the underside of the
handset if desired.
EMO
ANNC
L
L
E
R
I
D
/
M
E
S
S
A
G
E
S
555 1234
3
MSG#
555 1234
3
MSG#
Directory card
M1- Mom
M2- Bill at work
M3- School
1- John Smith
2- Betty Johnson
3- Pat Taylor
4- Chris Williams
ATT-1855CIB-d04.qxd 3/19/05 5:09 PM Page 12