User manual

11
Telephone Operation
Feature menu
Language
Press SKIP/REPEAT to select the language used in all
menus and screen displays.You can choose English,
Espanol or Francais.
Home area code/Local area codes
Caller ID numbers are not always displayed in the
correct dialing format.To make callbacks easier, you can
enter your home area code so that it is not included
when a number is displayed or dialed.
You can also enter up to 4 local area codes for areas
nearby.When you receive a call from one of these
areas, the local area code is automatically included
when the number is displayed or dialed.
Use the keypad to enter your home area code, then
press SET UP to enter up to 4 other area codes if
desired.
When you dial a Caller ID entry:
 Calls from your designated home area code will be
dialed out using 7 digits, without the area code
(i.e., 555-1234)
 Calls from your designated local area codes will be
dialed out using 10 digits, with the area code included
(i.e., 818-555-1234).
WHICH LANGUAGE?
0
MSG#
HAC--
HOME AREA CODE?
0
MSG#
LAC1--
LOCaL AREA CODE
0
MSG#
MEMO
ANNC
C
A
L
L
E
R
I
D
/
M
E
S
S
A
G
E
S
10
Telephone Operation
Feature menu
In the feature menu you can customize how the tele-
phone works. Make sure the answering system is off
(red light off), then press SET UP repeatedly until the
feature you want is displayed. Press SKIP/REPEAT to
change settings. Press SET UP again to accept the new
setting and move to the next feature.
Contrast
Press SKIP/REPEAT to adjust screen contrast to maxi-
mize readability in different lighting conditions.There
are five contrast levels (1-5).
Call history
Press SKIP/REPEAT to turn the Caller ID log on or off:
 All Calls: Each incoming call is logged.
 No Calls: No Caller ID information is kept.
Repeated calls
The Caller ID log notifies you when multiple calls are
received from the same number. Press SKIP/REPEAT to
turn this feature on or off:
 Combined: Only the most recent call from each
number is kept.A REP icon is displayed if more
than one call is received from the same number.
 Separate: Each call is logged, even if the same person
calls more than once.
Call waiting
When on, the telephone displays and logs Caller ID
information if you get a new incoming call while on an
existing call. Press SKIP/REPEAT to turn this feature on
or off.
Turn off answering system
(red light off)
Press SET UP to select feature.
Press SKIP/REPEAT to change.
Press SET UP to save.
4
SET CONTRAST
0
MSG#
CALL HISTORY
0
MSG#
REPEATED CALLS
0
MSG#
cid-CALL WAIT
0
MSG#
ATT-1855CIB-d04.qxd 3/19/05 5:09 PM Page 10