USER'S MANUAL Digital Answering System 1760

22
NEW CALL Light
This light stays on steadily when you have received call information but have not yet
reviewed it.
Reviewing Call History
1 To review latest calls,press c.
2 To advance through the call history from an earlier call,press C.
Call history display
NOTE: If a caller left a voice message, you’ll see the MSG indicator over the right
softkey. Press the softkey to listen to the message.
Removing Call Records from History
Press D to erase a displayed call record.
To remove all calls from history,press C or c until the screen displays
End Of List,then press D. The screen prompts Remove All Calls Are you
sure?. Use the softkey to select YES
.
Display Dial
NOTE: You must have a phone attached to the unit (see INSTALLATION), and you
must lift the receiver for this feature to work.
As you review calls in history,you can dial a displayed phone number. If the call
information came from your Home Area Code (the one you programmed during
Installation),the screen displays only the seven-digit number you are calling (without
an area code). When you use Display Dial,the system dials the seven displayed digits.
CALLER ID OPERATION
1760_book_1AT&T 5/1/00 7:38 PM Page 22