User's Manual Chapter 13

13
3. Dial ✳72 and listen for the second dial tone.
4. Follow the prompts and enter the number to which
you want your calls forwarded (up to 32 digits).
1
To deactivate:
1. Dial your local remote access number.
2. When prompted, dial your 10-digit telephone number
and PIN.
3. Dial ✳73 and listen for the second dial tone.
4. Follow the prompts to deactivate the Call Forwarding.
Note: You must follow steps 1 through 4 each time you use
Call Forwarding—Remote Access.
Call Forwarding —Selective
1. Dial ✳63 and follow the instructions to review the list,
change, or enter a new number you can forward.
2. Enter the 10-digit telephone number (1+10 digits for
long distance calls) to which incoming calls from your
preselected numbers are to be forwarded, and follow
the prompts to confirm it.
1
3. Alternatively, enter the telephone numbers on the
screening list that are to be forwarded, and press #
after each one.
4. After you’ve finished your list, listen for the announcement
confirming that Call Forwarding Selective has been
activated, and hang up.
5. To deactivate, simply dial ✳63.
This service automatically
forwards only incoming
calls from the telephone
numbers you select.
Calls from any other
telephone number will
not be forwarded. You
can program up to
12 different telephone
numbers.
Call Forwarding
Several Call Forwarding options are available with
AT&T Digital Broadband.
Call Forwarding —Variable
1. Dial ✳72 and listen for the second dial tone.
2. Enter the number to which you want your calls
forwarded (up to 32 digits).
1
3. When prompted, verify the number by pressing 1.
4. To activate, press 3 and then hang up.
5. To deactivate, simply dial ✳73.
Note: You must follow these steps each time you use
Call Forwarding.The forwarding number is not saved.
Call Forwarding —Remote Access
Start by calling your local remote access number which was
given to you at the time you ordered this feature. Use this
number each time you need to activate or deactivate your Call
Forwarding — Remote Access service. If you do not have your
local remote access number, please call 1 877 ATT-DGTL
(1 877 288-3485), and follow prompt #1, to request one.
To activate:
1. Dial your local remote access number.
2. When prompted, dial your 10-digit telephone number
and PIN.
This service automatically
forwards every incoming
call to another number
you specify (up to
32 digits).
Call Forwarding — Remote
Access lets you activate,
deactivate, and change
the features of Call
Forwarding when you’re
away from home.You’ll
receive a PIN when you
sign up for the service.
If you wish to change
or reset your PIN,
simply call us.
12
FPO FPO
1
Long distance charges may apply to calls you forward, depending on the destination
of the call.
1
Long distance charges may apply to calls you forward, depending on the destination
of the call.
Calling Features
(cont.)
AFWA20.CalifGuide w VM2d 11/22/00 11:59 AM Page 12