User's Manual Chapter 13

15
Caller ID Blocking - per Line
Once you subscribe to this feature, your telephone
number will no longer be displayed when you call
someone who has Caller ID.
To deactivate this feature on a per call basis:
1. Pick up the phone and listen for a dial tone.
2. Press *82 and wait for another dial tone.
3. Complete the call as usual.
4. When you hang up, your Caller ID Blocking is
automatically re-connected for the next call.
Caller ID Blocking - per Call
With this feature, you can block your telephone number
from displaying on any call you make. Otherwise, it
will be displayed as usual.
To initiate Caller ID Blocking for a call you are about to
place:
1. Pick up the receiver and listen for a dial tone.
2. Press *67 and wait for another dial tone.
3. Complete the call as usual.
Note: To activate this feature, you must follow these
steps for each call on which you want to use Caller ID
Blocking.
You can keep your phone number
and name anonymous to any party
you call. If the receiving party has
Caller ID, they simply see the words
“Private” or “Anonymous”.
You can use Caller ID Blocking on a
per call basis.