User's Manual Chapter 13

Chapter 12: Test Setup Photos
AT&T Wireless Services
12-819
FCC Type Acceptance Application
10991 Rev. 1.0 7/6/99
Figure 12.14 shows the 3 Meter Chamber EMCO Antenna Tower
which was controlled with the EMCO 2090 to vary the receive antenna
height from one to four meters. Also shown is the Chase CBL6111A
30MHz to 1000MHz Biconical - Log Periodic receive antenna, used for
radiated emissions testing at a distance of three meters from the device
under test.
Figure 12.14—Radiated Emission 30MHz - 1GHz test set-up