Operation Manual
AT-S3D Dual SIM Phone Manual
Page50of84
Tip: When searching Bluetooth devices, make sure that the peripheral Bluetooth
devices are within the signal cover range and can be searched. To match the
searched devices, you need to discuss with the user of this device about a pair of
matching passwords. To match the hand‐free device,you must
input itsmatching
password.Aftermatching,thisdevicewillbesavedinmydeviceview.
UseBluetoothtoReceive/SendData:
1.Opentheapplicationsneededtosavethecontenttobesent.Forexample,tosend
photos to another compatible device, you should enter the album or file
management.
2.
Choosethecontenttobesent,andthenchooseOptions‐>Send‐>ToBluetooth.The
screenwilldisplaythedevicesupportingBluetoothwirelesstechnologyandwithin
thesignalcoverage.Todisconnectsearch,choose“Cancel”.
3.Choosethedevicetobeconnectedwith.
4. If another device requires matching before data transmission, the
device will
sendhintandrequireinputtingmatchingpassword.
5. After the connection is established, the mobile phone will display data
transmissionspeed.
6. When other Bluetooth devices send data to my service, the mobile phone will
hint and ask whether to receive the data. The received data will be
stored in the
initiallysetReceivedfolder.
Tip:Youcansetthestoragepositiontoreceivefilesasotherfoldersorthefolderson
T‐flash card. After setting, the file received via Bluetooth will be automatically
savedtothespecifiedfolder.
Tip:
ThefunctionofusingBluetoothheadsetforcallsislimitedtoonlyhost(SIM1)
call or slave (SIM2) call. If alternate SIM1 and SIM2 calls are available, this
functionwillnotbesupported.
Before using Bluetooth headset for calls, please go to the menu settings to
confirmthat
theaudiopathhasbeensetashand‐freedevice.
Non‐stereoBluetoothheadsetcannotbeusedtolistentomusic.