Operation Manual

AT-S3D Dual SIM Phone Manual
Page26of84
ReadDialed/Received/MissedCalls
In the standby menu, press “SIM1 dial key” to fast view the 60 latest
dialed/received/missed calls of SIM1; press “SIM2 dial key” to fast view the 60
latestdialed/received/missedcallsSIM2.

KeypadLock
Under the defaulted settings, in standby menu, restore the slide, and then the
mobile phone
 willenter keypad locked state; open the slide, then the keypad will
beactiveautomatically.Whentheslideisopen,instandbymenu,ifidlefor30s,the
mobilephonewillautomaticallyenterkeypadlockedstate.
Keypadactive:Inkeypadlockedstate,presstherightsoftkeyandtheleft
softkey
synchronouslytoactivateit.
Tip:Aspertheactualdemand,youcansetthekeypadlock.Formoredetails,refer
toSecuritySettings‐>KeypadLock.

FastSetStandbyMode
Instandbymenu,underthedefaultedsettings,presstheleftdirectionkeyto enter
the SIM list menu; if two cards are inserted, set the SIM
 card as SIM1, i.e. enable
SIM1 and only SIM1 standby; SIM2, i.e. open SIM2 and only SIM2 standby;
SIM1+SIM2,i.e.openSIM1andSIM2andbothcardsstandby.
Tip 1: If only one card is inserted, after entering “SIM Card List” menu, you can
onlyseethestateofthecurrentSIMcard.
Tip2: OpenSIM1+SIM2 indicates twocards work atthesame time.In suchcase,
you can use all functions of the two SIM cards (refer to the instructions of all
functionalmodulesfordetails).

Shoot
Instandbymenu,presstheUPkeyoftherightsidekeyto
quicklyentercameraand
takephotos.

