Specifications

Maintenance 3-11
Resistor Replacement
To replace the top resistor:
CAUTION!
1. Turn the power off by moving the Main Switch to the OFF position.
Before performing this procedure, make sure the machine power is off. Failure to
do so could result in serious injury and damage to the equipment
2. Open the hood to access the resistor.
3. Open the top access cover of the oven.
CAUTION!
4. Cut the plastic collars off the mask.
You will need to open the hood to make this measurement. Please refer to “Hood
Opening/Closing Operation” in the TC V3 Operations Manual.
5. Remove the mask and set aside.
Figure 3-13 Collar
Figure 3-14 Retaining Nut
Mask
Retaining
Nut
Collar
Resistor
Cable
Resistor