Specifications

Maintenance 3-9
Figure 3-10 Output Rail
8. If the three measurements are not equal, remove the screws from the rail fixation and adjust
the position of the rails. See Figure 3-11.
Figure 3-11 Conveyor Rail Screws
9. While the oven is still cold, check that the PCB can slide freely from one side of the oven to
the other.
10. Turn the power on by moving the Main Switch to the ON position.
11. When the oven is hot, check that the PCB can slide freely from one side of the oven to the
other.
E
Screws