Specifications

Maintenance 3-5
Conveyor Chain Tension Adjustment
To adjust the tension of the conveyor chains:
1. Turn the power off by moving the Main Switch to the OFF position.
2. Remove the access cover at the input of the conveyor and set aside.
3. Using an adjustable wrench, adjust the tension of the spring by turning the adjustment nut
(Figure 3-3).
4. Make the same adjustment on the other side of the conveyor.
Figure 3-3 Conveyor Chain Location
5. Turn the power on by moving the Main Switch to the ON position.
6. Before starting a production, activate the conveyor movement and check that the conveyor
chain turns without any jerk or noise.
7. Replace the access cover.
CAUTION! During production (oven in heating) check that the spring is still in tension.
Conveyor Chain
Spring
Adjustment Nut