Owner`s manual

Safety 5
2 Safety
Overview
This section describes the precautions to be taken to promote safety of personnel and prevent unnecessary
damage to your DV-7000 or DV-8000 Series Heli-Flow Pump and valuable workpieces.
WARNING! CAUTION!
Unsafe equipment conditions can result in personal injury or property damage.
Failure to properly operate and maintain the system in accordance with this manual
may jeopardize the built-in safety features.
CAUTION! The DV-7000 and DV-8000 pumps are precision instruments. Follow all precautions
and use care when installing, operating, or performing maintenance/service. Failure
to do so may cause damage to the pump. Only trained personnel should perform
pump installation, operation, maintenance, and service.
"NOTE Safety is considered a joint responsibility between the original equipment manufacturer
(Asymtek) and the end-user (owner). In addition to those recommended in this manual,
safety precautions and practices should be in accordance with local laws and regulations.
Intended Use
The DV-7000 and DV-8000 pumps are intended for use as described in this manual. Using the pump for
other purposes is not recommended. Some examples of pump misuse include:
• Using incompatible materials
• Making unauthorized modifications
• Removing or bypassing safety guards or interlocks
• Using incompatible or damaged parts
• Using unapproved auxiliary equipment
• Operating equipment in excess of maximum ratings
WARNING! Unsafe equipment conditions can result in personal injury or property damage.
Failure to adhere to safety warnings and precautions could result in serious bodily
harm to the user.