Owner`s manual

Troubleshooting 39
6 Troubleshooting
Overview
This section will help you determine the origin of problems you may experience with your pump and suggest
the recommended corrective actions.
If you experience problems that are not listed in this section, or continue experiencing the problem after
trying the suggested corrective actions, please contact Asymtek Technical Support for more advanced fault
diagnostics.
TIP You may want to contact your nearest Asymtek Regional Support Center (RSC) for Dispensing
system problems or problems that may be attributable to fluid selection, dispensing applications, or
programming.
Safety First
Before troubleshooting a problem, please familiarize yourself with the important information provided in the
Safety section.
WARNING! Dispensing equipment in need of troubleshooting may have High Voltage present in
both designated and unsuspected places. High Voltage can result in personal injury
or death.
CAUTION! Troubleshooting should only be performed by trained service technicians.
Troubleshooting the Pump
Basic troubleshooting and suggested recovery measures are presented in Table 6-1. Due to variances in
production environment and operational conditions, not every possible problem can be addressed.
TIPS To assist in the troubleshooting effort, you may want to review “Theory of Operation” in the
Operation.
To quickly identify problems, look for obvious signs such as burnt, missing, damaged, or loose
parts as well as obstructions and spills. Obvious uncharacteristic heat, noise, vibration, odor, or
movement can also help to isolate problems.