Owner`s manual

6 Safety

Safety of Personnel

• Only trained personnel should be permitted to perform installation, operation, maintenance, and

troubleshooting procedures on the DV-7000/DV-8000 Series pumps.

• Before performing maintenance or service on the DV-7000/DV-8000 pumps, position it at the

front of the dispensing chamber. This will provide easy access to components and limit exposure

to hazardous areas.

• Immediately push the red Emergency Machine Off (EMO) button on your dispensing system if

personnel are in danger.

• Do not touch the moving parts while the dispensing system is operating.

• Remove the DV-7000/DV-8000 pump completely from the dispensing system and allow the

heated parts to cool before cleaning or performing maintenance.

• Relieve pneumatic pressure before adjusting or servicing pressurized components.

Material Safety

• Follow Material Safety Data Sheet (MSDS) recommendations for the proper handling, cleanup,

and disposal of hazardous materials.

• Know the MSDS recommendations for treatment of injury resulting from exposure to hazardous

materials.

• When working with multiple fluids, refer to the MSDS to ensure the materials are compatible.

Preventing Equipment and Workpiece Damage

• Immediately push the EMO button on the dispensing system if the dispensing system, pump, or

a workpiece is in danger of being damaged.

• Use standard Electrostatic Discharge (ESD) precautions when working near sensitive

components. Always wear a grounding strap and connect it to the ESD ground before handling

workpieces and equipment.

• Perform all recommended DV-7000/DV-8000 maintenance procedures at the suggested

intervals.

• Immediately contain and clean up any caustic or conductive fluid spills as recommended in the

material manufacturer’s MSDS.

• If fluid gets into internal portions of the DV-7000/DV-8000, immediately contact Asymtek

Technical Support.

• Use only replacement parts that are designed for use with the original equipment. See the

Parts

Replacement section for a list of available parts and part numbers.