User guide

7-4 Programming Basics
Look at the following program instructions in Figure 7 -1. Specific pattern program lines are
displayed separately. Only the instructions for the currently selected pattern are displayed in
the programming screen. As shown, the currently selected pattern is Workpiece. The
instructions for Workpiece shown in the programming screen are function calls to a
sub-pattern called Chip 1. To display the instructions for Chip 1, you would select Chip 1 from
the Pattern Name Text Box.
Figure 7 -1
Pattern Name
Text Box
Function call to do
pattern “chip1” at
this location.
Pattern
“chip1”
Instructions
Pattern
“Workpiece”
Instructions