User guide

6-14 Setup and Configuration
To perform a Calculate Master Offsets procedure:
Follow all on-screen prompts.
1. In the Main Window, click on Configuration.
2. Click on Needle Setup, and select Setup Parameters.
> The Needle Setup Parameters dialog box opens. See Figure 6-5.
Figure 6-5
3. Select Calculate Master Offsets in the Machine Setup Process section of the dialog
box.
?NOTE If you are changing from Valve Offsets to Calculate Master
Offsets, it is recommended that you exit FMW and restart FMW
before continuing this procedure.
4. Click on OK.
5. Click on Needle Setup on the Configuration menu again, and select Calculate Master
Offsets.