User guide

6-6 Setup and Configuration
Initial Setup
Your system is initially configured and setup by an Asymtek representative. However, it may
be necessary or desirable to repeat some of the configuration routines to insure programming
accuracy.
?NOTE Initial Setup is not equivalent to a complete system re-installation
configuration and setup procedure. If your system requires re-installation,
please call Asymtek for assistance.
There are two optional Initial Setup procedures:
• Calculate Master Offsets
• Valve Offsets
Both procedures perform all of the necessary setup functions. The main difference between
the two procedures is that Valve Offsets allows you to perform the entire process one step at
a time. Calculate Master Offsets walks through the entire process from start to finish.
?NOTE Even though both procedures perform all of the necessary setup functions,
they are not identical. It is recommended that you use Valve Offsets as
your setup procedure.
?NOTE If you change from one setup procedure to the other, it is recommended
that you exit FMW and restart FMW before performing the newly selected
procedure.
?NOTE Before performing either the Calculate Master Offsets or the Valve
Offsets setup procedure, you must first setup the Vision System.