User guide

6-4 Setup and Configuration
Default passwords for each level are shown in Table 6-1 below.
To setup passwords:
1. In the FMW Main Window, click on Configuration.
2. Select Setup Password from the Configuration menu.
3. Enable the Service option, and type in an old password (if previously password
protected) and type in a new password in the appropriate text boxes.
TIP Passwords must be selected for the service and System levels of
operation. Passwords can be up to 8 characters long. The default
passwords are shown in the table below. If you need help restoring
the defaults, contact Asymtek Technical Support.
4. Click on OK.
Table 6-1 Passwords and Operator Level
Level Default Password
Service Service
System System
Production No Password Needed
è To see how the Operation Level restricts access to the menus, change the
Operation Level as described below. Visit the menus and windows after changing.
To change Operator Level:
1. Select Change Operation Level from the Configuration menu.
2. Select the level of operation you wish to access.
3. Type in the password for the Operator Level.
> The menus will be appropriately restricted.