User guide

6-2 Setup and Configuration
To configure the dispensing system:
1. Close all open programs, including FMW.
2. In the FMW program group, locate the FMWTools icon .
3. Open FMWTools by double clicking on the icon.
> FMWTools has three levels of operation, Service Mode, Diagnostic Mode, and
Production Mode. To fully configure the dispensing system, you must have
access to the Service Mode. Contact Asymtek Technical Support for more
information.
4. In the FMWTools Main Window, click on Configuration Wizard.
5. In the Configuration Window, click on System Configuration.
> A secondary Configuration Window, shown in Figure 6-1, opens.
Figure 6-1
6. Click on the arrow next to each text box to view all available options and select the
appropriate option.
> Contact Asymtek Technical Support for help, if necessary.
7. Click on Apply to activate the changes.
This concludes the tutorial on System Configuration.